2005 – Characterisation of the Ross River Dam Foundations

The Stage I construction of the Ross River Dam was completed in December 1973. The reservoir
reached full supply level (FSL) and then spilled in January 1974. In 1976, the left embankment was
raised to Stage II level. Spillway gates were installed in February 1978 with full supply level for
Stage 1A (FSL).
In the years following the first filling of the reservoir after the raising of FSL, salt scalding
downstream of the northern portion of the left embankment occurred. This was attributed to
foundation seepage. Investigations started in 1978 to define what remedial measures were required to ensure the safety of the left embankment. Fissured clays were first discovered in the foundations of the Ross River Dam during these investigations.
Fissures could substantially reduce the overall strength of the soil foundations. Therefore the effect of these fissures needs to be considered when evaluating the acceptable levels of reliability against embankment failure. More extensive fissuring was discovered during the current investigations and a cataloguing system was employed to characterise the foundation conditions.
A simplified layer model was adopted early on in the design but did not fully demonstrate the
complexity of the subsurface conditions. Extensive use was made of historical geological data,
current investigation data and the application of GIS systems. The resulting model more clearly
represents the foundation conditions and high degree of variability and was used in subsequent risk assessments for the upgrade design.

Buy this resource