2012 – Logue Brook Dam Outlet Works Upgrade

Sofia Vargas, Robert Wark

Logue Brook Dam, 130 km south east of Perth, was completed in 1963 and comprises a 49 m high main embankment with a crest length of approximately 335 m and the reservoir impounds 24.59 GL of storage. The outlet works comprise an inlet tower, an outlet pipe (DN 1100 mm) and a valve house. Water from the dam is released through a clam shell valve and there is a sluice valve upstream of the clam shell which acts as a scour isolation valve.
Previously Logue Brook Dam supplied water into the Harvey irrigation system by releasing water down the river which was then drawn off downstream and pumped into the piped network. The scheme planning had identified that constructing a pipeline from the dam outlet to connect directly into the piped irrigation system would eliminate the need for pumping as the system could then be gravity fed directly from the dam.
The outlet works upgrade comprised the refurbishment of the Inlet Tower, refurbishment of the Valve House, installation of new valves, environmental release and magnetic flow meters, electrical, communications, SCADA, instrumentation and security upgrades.
This paper describes the diving inspection and above water inspections of the inlet tower, refurbishment of the existing installation, challenges of the design, adopted solutions, connection to the Harvey Water pipeline and construction issues. The project represents an interesting case history of improving dam safety standards to current ANCOLD guidelines to provide a modern and safe facility.
Keywords: Outlet works, diving, OH &S Issues, safety, deterioration

Buy this resource